Kukiits
25-11-2016 à 20h31
|
but throttle is like normal but in reverse its full gas, but to front not :(
Anonyme, 11 msg, (OTH). |
Kukiits
25-11-2016 à 20h34
|
i get it steering its okay, but throttle ?
to front and back its working normal, but full power is in reverse not front
Anonyme, 11 msg, (OTH). |
publicité 25-11-2016 à 20h34
| Creation du fichier ..../fichier/pub_log.txt
|
Kukiits
25-11-2016 à 20h53
|
If you imagine the behaviour should be as follows:
Full throttle on radio: Full power going forwards.
Full reverse on radio: Car brakes.
Centre and reverse again on radio: Car reverses with lower power than forward.
Full throttle on radio: car goes forwards again.
But what I'm getting is:
Full throttle on radio: Partial power going forwards
Full reverse on radio: Car instantly goes into reverse and reverse has full power
Full throttle forwards: Car brakes
Centre and forwards again on radio: Car goes forwards again under partial power.
Anonyme, 11 msg, (OTH). |
Tchill
26-11-2016 à 08h57
|
to reverse the acceleration and direction is like that! then reverse the 2 wires of the motor to have the brake to the right place!
look at her -> nikkoevolution.fr
|
Kukiits
26-11-2016 à 16h16
|
I have this controller Référence:10900
:( maybe you know how its in this ?
Anonyme, 11 msg, (OTH). |
Tchill
26-11-2016 à 16h56
|
It's the same procedure!!!
|
Kukiits
27-11-2016 à 14h55
|
i took it apart, to the steer potenciometer is wires, but to throttle is on the palte, there are no wires :(
Anonyme, 11 msg, (OTH). |
Tchill
27-11-2016 à 15h40
|
For each function there is a 3-wire potentiometer!
And for the trims there are even 2 others always with 3 wires on the pistol controls.
To reverse the functions, the outer wires of the direction potentiometer must be reversed for the direction. To reverse forward / reverse the 2 external wires of the acceleration potentiometer must be reversed.
If you make pictures I can help you.
|
publicité 27-11-2016 à 15h40
| Creation du fichier ..../fichier/pub_log.txt
|
Kukiits
27-11-2016 à 17h22
|
I got this, if someone need i got a picture. on the electric plate you need to cut original channels, and bridge with wires mirror control. and with steer i got it like the link you gave me.
Anonyme, 11 msg, (OTH). |
|